IKEA Wood Dowel x10 Pack (IKEA Part #101375)

Product Information

I was thinking a lot about its construction and wondered if you could apply this principle on furniture other than trestles. See, the milled grooves provide tremendous stability,” says Anders.

IKEA KALLAX 5 ReplacementScrews Hardware Kit Compatible with IKEA KALLAX 5

You will need to use a sharp chisel and be very careful not to damage the surrounding wood. First, make a small pilot hole in the center of the dowel with the tip of the chisel. Next, insert the chisel into the pilot hole and start prying up on the dowel. With the hole drilled, insert a screwdriver into the hole and twist until the dowel pops out from its seat in the wood. Be careful not pull too hard or you may damage the surrounding wood finish. Conclusion With the wedge dowel, you don’t need fittings at all. The clever wooden piece replaces all metal fittings in the construction.

Storage & organisation Decoration Furniture Textiles Outdoor products Kitchen & appliances Lighting Smart home Beds & mattresses Baby & children Kitchenware & tableware Bathroom products Office furniture Rugs, mats & flooring Laundry & cleaning Home electronics Pots & plants Home improvement Food & beverages Summer Christmas Rooms Once you’ve cut through the dowel, gently pry it out of the hole with a screwdriver or similar tool. If necessary, sand down any rough edges on the wood before reassembling your Ikea furniture. One method is to use a sharp knife or chisel to score the surface of the dowel pin. This will help break the bond between the dowel pin and the surrounding wood.

remove a wooden dowel from wrong hole? : r/IKEA - Reddit How to remove a wooden dowel from wrong hole? : r/IKEA - Reddit

The cleverness of the wedge dowel took a further leap thanks to Knut and Marianne. They were challenged by the idea of creating a craftsmanship feature that would fit in with IKEA mass production. A series of tables was designed where they used ash veneer on the table top and solid birch for the legs. Initially they called the collection ‘Gasell’, a name that reflected their idea about a light, graceful table on long legs. The notion of non-visible fittings enhanced the elegant gazelle, and the wedge dowel was a given in the collection. It was also a given how the details in the design would look. Yes, we refused to use a knob and the manufacturer refused to accept the keyhole. But we solved it with a long, drawn-out, heated argument,” Marianne laughs. If you’re looking to remove a wooden dowel from IKEA furniture, there are a few things you’ll need to know. First, it’s important to understand that IKEA furniture is not designed to be disassembled and reassembled multiple times. This means that the wooden dowels holding the furniture together are meant to be permanent fixtures. Read Also: How to Cut Basswood StripsAnother method that you can use is sawing through the dowel with a hand saw or power saw. This method is more likely to damage the surrounding wood, so be very careful when doing this. Next, use a drill or power drill fitted with a bit slightly smaller than the diameter of the dowel to create a hole in the center of the dowel.

First, you need to determine what type of joint the dowel is holding together. If the joint is glued, you will need to use a chisel or saw to remove the dowel. If the joint is not glued, you may be able to simply pull the dowel out by hand. Just a few hundred steps away from the IKEA prototype shop were the desks of designers Knut Hagberg and Marianne Hagberg. Brother and sister, both are furniture designers and interior decorators. Both wild and creative. And always working as a team. Marianne Hagberg says, “We were both hired in 1979 and our first assignment was to ‘do great things’.” Instead of a knob for the drawer we wanted a keyhole. My god how we fought for that!” Knut Hagberg remembers.